How to judge the quality of clothing hanging grain mark trademark? What are the ways to judge the quality of webbing? The following editor briefly tells you about it.
Chromatic aberration inspection of the hanging grain manufacturer: the naked eye observation that there is no yin and yang color on the surface of the belt, the color and pattern (the stitches of each woven belt must be in one color), the stitch and cloth edges of the winding belt cannot be exchanged. If there is the original version, it needs to be compared with the original version of the clothing hanging tablet. Generally, customers require a similarity of more than 95%, and some more demanding customers require more than 98%. If the color meets the customer's requirements, all colors need to be re-matched and patterned.
Wool: Observed by naked eyes, the two surfaces and sides of the woven label should not have serious hair balls or wool that affect the belt surface.
Drawwork: Observed by the naked eye, there should be no skip stitches in the woven label.
Pollution: Observed by naked eyes, there should be no oil stains, stains, or dust on the surface of the woven label.
The above is a general way to judge the quality of the webbing with the naked eye. Here is an introduction to the help of measurement:
Thickness detection: tolerance cannot exceed ±0.1MM
Width detection of hanging tablets manufacturers: 1" and 1" and above the width of the clothing hanging tablets trademark tolerance can not exceed ± 0.25 minutes; 25MM and above the width of the woven label tolerance can not exceed ± 0.5MM; 1" and the width of the clothing hanging particles below 25 mm , The standard tolerance cannot exceed ±0.25MM; Note: Plain weave and herringbone sidebands must be of sufficient size, but cannot exceed 0.25 points.